If you are planning to buy a vibro sifter, the first question is usually the price. In India, a vibro sifter machine costs from about ₹45,000 + GST for a basic 24-inch single-deck model to ₹3,50,000 + GST or more for a large multi-deck or ultrasonic machine. That is a wide range, and the reason is simple: no two plants sieve the same material in the same way.
As a vibro sifter machine manufacturer in Vadodara, JS Vibro builds every machine to the buyer’s material, output and hygiene needs. This guide explains the seven factors that decide the price, what different industries usually pay for, and how to get an accurate quotation the first time.
Vibro sifter price range in India
| Machine type | Typical use | Price range (excl. GST) |
|---|---|---|
| Basic single-deck, 24″ | Small batches, simple separation | From about ₹45,000 |
| Standard single or double deck, 30″–48″ | Food, chemical, general powders | Mid range |
| GMP pharma model, SS 316, mirror finish | API, granules, excipients | Higher, due to finish and documents |
| Large multi-deck or ultrasonic, up to 96″ | Fine powders, high output, multiple grades | ₹3,50,000 and above |
These are starting points. The final price depends on the configuration below.
7 factors that decide the price of a vibro sifter
1. Sieve diameter. Vibro sifters are made from 18 inches to 96 inches in diameter. A bigger screen gives more output but needs a bigger frame, stronger springs and a larger motor, so the price rises with size. See how to size a vibro sifter for your output.
2. Number of decks. A single-deck machine separates material into two fractions. A double or triple deck machine gives three or four grades in one pass, but every extra deck adds a screen frame, a discharge spout and clamps. Read single deck vs multi-deck vibro sifter to see which you need.
3. Material of construction: SS 304 or SS 316. SS 304 suits most food and general industrial powders. SS 316 resists corrosion and chemicals better and is the usual choice for pharma, so it costs more.
4. Surface finish. A standard matte finish is the most economical. A mirror-polished, crevice-free finish for GMP plants takes more labour and raises the price.
5. Motor type. A standard vibratory motor is fine for most plants. Chemical and solvent areas may need a flameproof motor for ATEX Zone 21 or 22, which costs more.
6. Anti-blinding accessories. Fine or sticky powders can clog the mesh. Ball-tray kits, rotary brushes or an ultrasonic deblinding system keep the screen open but add to the cost, with ultrasonic at the top end.
7. Documentation and options. Pharma buyers often need IQ/OQ/PQ validation documents. Custom inlet and outlet positions, full stainless steel frames and special gaskets also change the price.
What different industries usually buy
- Pharmaceutical: SS 316 contact parts, mirror finish, FDA-grade gaskets and validation documents. See our guide to the GMP vibro sifter for pharma.
- Food and spices: SS 304 or SS 316 with an easy-clean design; often single or double deck.
- Chemicals and pigments: SS 316 and, where needed, a flameproof motor.
- Minerals, ceramics and fertilizers: larger diameters or rectangular models for high output, with an MS powder-coated frame where hygiene is not critical.
How to get an accurate vibro sifter quotation
Send these details with your enquiry and you will get a precise price in one round:
- Material name and whether it is dry, damp or liquid
- Required output in kg per hour
- Mesh size or particle size you need, and how many grades
- Bulk density, if you know it
- Industry and any GMP, food or ATEX requirement
- Preferred material of construction and finish
If you are unsure about output, our guide on vibro sifter capacity explains how diameter and decks affect it.
Why a factory-direct price costs less
Buying directly from a manufacturer removes the trader’s margin. JS Vibro designs and builds every vibro sifter at its own 20,000 sq. ft. facility in GIDC Waghodia, Vadodara, and tests each machine before dispatch. You also get spare parts and service from the people who built the machine, which keeps running costs down over its life.
Get your vibro sifter price
The fastest way to know your exact cost is to share your material and output with us. Our engineers will recommend the right size, decks and options and send a detailed quotation. Get a vibro sifter quote today.
Frequently asked questions
What is the price of a vibro sifter in India?
Vibro sifter prices in India start from about ₹45,000 + GST for a basic 24-inch model and go up to ₹3,50,000 + GST or more for large multi-deck or ultrasonic machines.
Is GST included in the vibro sifter price?
No. Quoted prices are usually ex-works and exclude GST, packing and freight, which are added in the final quotation.
Is an SS 316 vibro sifter worth the extra cost?
For pharma, chemicals or corrosive materials, yes: SS 316 resists corrosion better and meets GMP expectations. For most food and general powders, SS 304 is enough.
What details should I send for a vibro sifter quote?
Your material, required output in kg/hr, mesh or particle size, number of grades, industry and any GMP or flameproof requirement.
Why do two vibro sifters of the same size have different prices?
The material of construction, surface finish, motor type, number of decks and anti-blinding options all change the cost, even when the diameter is the same.
